Manual Call Point

Connecting to the loop of SHIELD fire alarm system, BG-I450F Digital Manual Call Point (the MCP) is suitable for public places. When there is fire, pressing the action plate on the MCP can send the alarm signal to fire alarm control panel. After receiving the signal, the control panel will show address information of the MCP and generate alarm sound.


Operating Voltage Loop 24V (16V～28V)
Standby Current ≤0.6mA
Alarm Current ≤1.8mA
Indicator Red. Flashes once three seconds. Illuminates after alarming.
Type of Initiating Part Reusable
Initiating Mode Pressing the action plate manually
Resuming Mode Manually resumed by a special key
Programming Mode Electronically addressed
Code Range One address within 1～242
Wiring Two-wire, polarity-insensitive
Class Type A, indoor use
Ingress Protection Rating IP43
Ambient Temperature -10°C～+55°C
Relative Humidity ≤95%, non condensing
Material of Enclosure ABS
Dimension (L×W×H) 87.1mm×87.1mm×58mm (with back box)
87.1mm×87.1mm×23mm (without back box)
Mounting Hole Distance 60mm
Weight About 160g (with back box)
About 107g (without back box)
  • Electronically addressed. The address can be modified in field.
  • Alarming by pressing. Reset by a special key.
  • Plug-in structure.
  • Designed to comply with EN 54-11.

Contact us about Manual Call Point:

This site uses some unobtrusive cookies to store information on your computer. By using our site you accept our Terms And Conditions and Privacy Policy. ×