Repeater Panel

Designed and manufactured to the highest standards in a quality controlled environment the infiNET-R fire alarm annunciator provides a simple and convenient method of extending the controls and indications of the infiNET fire alarm control panel to other locations.

The large, graphic liquid crystal display and high brightness LED indicators duplicate the indications on the infiNET fire alarm control panel at up to 15 additional locations via a simple, two-wire serial data connection.

The infiNET-R is available in either a 24V DC powered option (which can be powered via an additional 2 cores from the infiNET control panel/local 24V DC supply) or a 230V powered option with local battery back up.

infiNET-R is housed in a small enclosure which is styled similarly to the infiNET control panel and is ideal for installations where a large control panel would be detrimental to décor such as entrance halls.

Up to 15 infiNET-R annunciators can be connected to each control panel on the infiNET network making LOCATOR ideal where multiple points of indication and/or control are required such as nurses stations or shop units.


Construction 1.2mm mild sheet steel
IP Rating IP30
FinishEpoxy powder coated
Colour - lid & box BS 00 A 05 grey - fine texture
Colour - controls plate & labels RAL 7047 light grey - satin
Display 8 lines of 40 characters graphic LCD
Cable entry 5 x 20mm knockouts in top of box and 5 in rear
Mains supply (Mains models only)
 230V AC +10% - 15% (20 Watts maximum)
24V supply (24V DC models only) 21 to 30V DC
Mains supply fuse 2 Amp, 20mm
Power supply rating 28V 750mA total (including battery charging)
Maximum ripple current 200 millivolts
Battery type (Yuasa NP) Two 12 Volt 1.9Ah sealed lead acid in series
Battery charge voltage 27.6VDC nominal
Battery charge current 200mA maximum
Battery fuse 200mA, 20mm, glass
Maximum current draw from batteries 95mA
Quiescent current of panel in mains fail 0.03 Amps
Serial data connection 2 core RS485 (Up to 1200 metres total cable length)
Maximum terminal capacity 2.5mm²
Weight 4kg (standard panel)
Dimensions (W x H x D) 330mm x 255mm x 90mm
  • Up to 15 annunciators can be connected to each infiNET-R fire control panel.
  • Large liquid crystal display (240 x 64 pixels)
  • High brightness LED indications
  • Internal sounder
  • Replicates all infiNET panel controls
  • Simple, two-wire serial connection
  • Removable electronics for easy installation
  • 24V DC or 230V AC power optionss
  • Low power consumption
  • Multi language options
  • Connection monitored by infiNET fire control panel

Contact us about Repeater Panel:

This site uses some unobtrusive cookies to store information on your computer. By using our site you accept our Terms And Conditions and Privacy Policy. ×