Analog Control Panel (2 or 4 Loops)

Available with 2 or 4 detection circuits, each capable of hosting up to 126 devices. infiNET-X uses the most advanced microprocessor technology to provide a control system of extremely high integrity.

infiNET-X can be configured to suit all types of system, from the most simple, to the highly complex. Its fully integrated and secure network provides an intelligent interface for building control.

A large area graphic display ensures that information is presented in plain language with detailed extra help available by pressing a ‘help’ button.

infiNET-X supports three of the most widely used communication protocols produced by leading fire detector manufacturers and employs daily calibration routines to ensure that the system is always at optimum performance.


Construction 1.2mm mild sheet steel
IP Rating IP30
Finish Epoxy powder coated
Colour - lid & box BS 00 A 05 grey - fine texture
Colour - controls plate & labels RAL 7047 light grey - satin
Display 8 lines of 40 characters graphic LCD
Detection circuits (Loops) 2 or 4 (400mA each)
Zone LED’s 0, 16, 48, or 96 (up to 500 software zones)
4 sounder circuits Each fused at 1 Amp (total load 2 Amp)
Fire contact Volt free 1 Amp 30V DC
Alarm contact Volt free 1 Amp 30V DC
Fault contact Volt free 1 Amp 30V DC
Programmable relay 1 Volt free 1 Amp 30V DC
Programmable relay 2 Volt free 1 Amp 30V DC
Fire routing output Monitored-voltage reversing, fused at 500mA
Fault routing output
 Monitored-voltage reversing, fused at 500mA
Extinguisher output Monitored-voltage reversing, fused at 1A
Fault input Volt free contact input signals fault
Reset input Volt free contact input resets panel
Intermittent input Volt free contact input pulses sounder outputs
Continuous input Volt free contact input for continuous sounders
Silence input Volt free contact input silences sounders
Programmable input 1 Volt free contact for any action required
Programmable input 2
 Volt free contact for any action required
Programmable input 3 Volt free contact for any action required
Auxiliary 24V DC output Fused at 500mA
System fuse 5 Amp self-resetting polyfuse
Mains fuse
 20mm 3 Amp
Operating Temperature -5 to +50° C
Operating humidity To 95% (non-condensing)
Mains voltage supply 110 or 230V AC 50 or 60 Hz. (specify when ordering, default is 230V)
Battery (24 hour standby) 12Ah 12V (2 per panel) (non-networked)
Day/night modes 2 with variable device sensitivity
Input delays Individual for each device selectable up to 2 minutes
Output delays Individual 2-stage to 10 minutes per stage
2 programmable function buttons Programmable to carry out any cause & effect, disablement or test action
3 programmable indicators Red/yellow/green to indicate any action
Network (option) Up to 64 panels on 2 wires (SEN-MX5801 Network Card required)
Printer (option) New front loading feature
Download lead SEN-MX5807 (standard) or SEN-MX5806 (economy)
Weight 10kg (standard panel)
  • 2 or 4 loop versions as standard
  • Larger enclosure available (fits 24A/H SLAs)
  • Loopless panel option (repeater)
  • 0, 16, 48, or 96 zone indicators
  • Option for Enable Control keyswitch
  • Network up to 64 panels/repeaters
  • 4 programmable sounder circuits as standard
  • 5.25 amp power supply to EN54 part 4
  • Large graphic display
  • In built help and alarm information screens
  • Certified to EN54-2/ EN54-4
  • Real time clock
  • Sensitivity adjustment and Drift compensation
  • Stylish enclosure design
  • Soft-touch tactile buttons
  • 2 programmable function buttons
  • 3 programmable front panel mounted LED’s
  • Improved front loading printer (optional)
  • Up to 512 programmable inputs/outputs per panel via 2 wire RS485 serial link (optional)
  • Simple Windows® graphical configuration utility

Contact us about Analog Control Panel (2 or 4 Loops):

Call us now for any assistance
Call us now for any assistance
This site uses some unobtrusive cookies to store information on your computer. By using our site you accept our Terms And Conditions and Privacy Policy. ×