Fire Rated Cable

Certified by LPCB to meet fire test Standards – BS EN 50200:2006 + Annex E 30 minutes, BS EN 50200 PH30, PH60 & PH120 & BS 6387 CWZ. It is also fully approved to the Low Smoke & Zero Halogen requirements detailed by BS 5839-:2013 & BS7629-1:2008.

Shield ‘Premium’ Cable retains continuity for 30 minutes under fire conditions at 830°C, this demanding fire cable test includes a final 15 minutes under fire & water spray conditions while a mechanical shock is applied every 5 minutes throughout the full 30 minute test.


LPCB approved to Fire Resistance Standard BS EN 50200:2006 +Annex E 30 mins
Fire Resistance Standard BS EN 50200:2006 PH120
Fire Resistance Standard BS 6387:1994 Clause 11 CWZ
Halogen Emission Standard BS EN 50267-2-1:1999
Halogen Emission Standard BS EN 61034-2:2005
Also for use with Emergency Lighting BS 5266-1:2005
Voice Alarm Systems Standard BS 5839-8:2008
Voice Communication Standard BS 5839-9:2003
(Risk Assessment May Demand Mechanical Protection)
Materials Drain Wire 0.80mm Dia (0.50mm2) Tinned Copper
Conductors Plain Annealed Copper
Core Installation Fire Resistant ZHLS Silicone
Screening Aluminium Foil
Outer Sheath Low Smoke Halogen Free Thermoplastic
Working Voltage Core to Core 500V
Core to CPC 300V
Types Outer Sheath Colours Red, White or Black
Number of Cores 2, 3 & 4 Core
Inner Cores CSA 1.0, 1.5, 2.5 & 4.0mm CSA
Resistance 1.0mm CSA 18.1 Ohms / 1 Km
1.5mm CSA 12.1 Ohms / 1 Km
2.5mm CSA 7.41 Ohms / 1 Km
4.0mm CSA 4.61 Ohms / 1 Km
Minimum Bend Radius Radius = 6 x Diameter
Operating Temp. Minimum/Maximum -40°C to +90°C
Installation Temp. Minimum/Maximum 0°C to +70°C
Voltage Drop
(DC or Single Phase AC)		 1.0mm CSA 44 Ohms mV / A / m
1.5mm CSA 29 Ohms mV / A / m
2.5mm CSA 18 Ohms mV / A / m
Approximate
Overall Diameter		 2 Core 1.0mm / 7.15mm
1.5mm / 7.40mm
2.5mm / 8.70mm
3 Core 1.0mm / 7.75mm
1.5mm / 8.55mm
2.5mm / 9.20mm
4 Core 1.0mm / 8.00mm
1.5mm / 8.80mm
2.5mm / 11.10mm
Approximate
Weights		 2 Core with CPC 1.0mm - 8.0 Kg / 100 m
1.5mm - 9.5 Kg / 100 m
2.5mm - 14.1 Kg / 100 m
3 Core with CPC 1.0mm - 9.5 Kg / 100 m
1.5mm - 12.9 Kg / 100 m
2.5mm - 19.1 Kg / 100 m
4 Core with CPC 1.0mm - 10.9 Kg / 100 m
1.5mm - 14.5 Kg / 100 m
2.5mm - 22.2 Kg / 100 m
Current Rating
(Current Ratings listed are at 30°C
Refer to BS7671/EE Wiring
Regulations for de-rating factor.)		 Cable Clipped
(DC or Single Phase AC)		 1.0mm 15A
1.5mm 19.5A
2.5mm 27A
Enclosed
(DC or Single Phase AC)		 1.0mm 13A
1.5mm 16.5A
2.5mm 23A
Insulation Resistance 10MÙ> at 5000V d.c.
  • Reduced Installation time and costs
  • Easy to install and Superb Working Flexibility
  • All in one - Easy to Strip Outer Sheath
  • No Separate Foil
  • No Additional Fibre Wraps
  • No mica tape on conductors
  • No additional core separators to remove
  • Cable Construction Provides High Level Data Protection

Contact us about Fire Rated Cable:

Call us now for any assistance
Call us now for any assistance
This site uses some unobtrusive cookies to store information on your computer. By using our site you accept our Terms And Conditions and Privacy Policy. ×