Analog Control Panel (1 Loop)

  • Loop capacity 235 addresses loop 1 can be expanded to 2 loops
  • 8x18 Graphical LCD Display
  • 30 Zone indication including manual intervention and control
  • 3 programmable alarm output
  • Positive Alarm Signal (PAS) Pre-alarm
  • Maintenance report of dirty detector
  • Networkable with all SHIELD Intelligent Fire Alarm panels
  • Programmable form PC by SHIELD
  • History log 999-events capacity in non-volatile memory
  • Test facility
  • RS485 Repeater Output (Max. 10)
  • Built-in gas extinguishing control.
  • Advanced user friendly programming software including ‘Fuzzy Logic’
  • Optional Colour Graphics
  • Optional Fireman’s Control Panel
  • Optional Panel Printer


Standard EN54 Part 2/4; BS5839 part 4
Approvals LPCB, CE
Main Input Voltage 220 ± 10% VAC 50/60 Hz
Input Current Rating 0.500A
System Operating Voltage 24 VDC Nominal (20-27 VDC)
Loop Capacity Loop 1:235; Loop 2:241 (Address)
Loop Length 1.00mm2-800M-Full Load
1.5mm2-1.2KM-Full Load
2.0mm2-1.5KM-Half Load
Loop Topology Class A and Class B
24 VDC Fused Relay Output Maximum Load 500mA at 17-28 VDC
Zone Capacity 30 Zones Programmable
Standby Batteries Twin 12Vdc; Bat: 24H
Sounder Circuits(3) Fire Alarm Output: 500mA/24Vdc/NO-NC
F.P.E. Output: 500mA/24Vdc/NO-NC
Sounder Circuit Output: 500mA/24Vdc/NO-NC
Fuses Mains 2A (20mm A/S ceramic),
Sounders (2): 1A (20mm A/S),
Fire alarm Output 0.5A (20mm A/S),
Battery: 2A (20mm A/S HRC ceramic)
Common Fault Relay Output Volt-Free changeover 1.0A at 24 VDC
Battery Charging Current Limit 600mA
Dimension Outer: 580x420x30 mm,
Inner: 550x393x173mm


Contact us about Analog Control Panel (1 Loop):

This site uses some unobtrusive cookies to store information on your computer. By using our site you accept our Terms And Conditions and Privacy Policy. ×